The store will not work correctly in the case when cookies are disabled.
Guide bush closed with stop
Material:
- stop: steel;
- bush: ball bearing steel 100Cr 6 (1.2067 respectively 1.3505);
- careful heat treatment, hardness HRC 60-64 / HV 720-815.
Characteristics:
- version similar to DE14 but with fixed stops on both sides;
- in combination with shaft diameter D ISO-h3, a pre-stressing of the ball guide is guaranteed;
- the stop is an effective cage limit for linear and rotating movements;
- the smooth running of the ball guide are not affected by the stops;
- fixed stops on both sides;
- the closed guide bush together with the in factory-fitted ball cage form one component;
- conductor diameter D1 finely honed for ISO tolerance IT 3, Rz 0.5 - 1.5 μm depending on the diameter;
- roundness within 1/3 ISO-IT 3;
- cylindricity within IT 1;
- rotation accuracy of a pre-stressed shaft within 0.0005 mm;
- outside diameter D2 n4 with a turning accuracy within IT 4 with respect to guide diameter D1 ground, one-sided with search edge;
- the maximum stroke length H is determined by the length of the guide bush (l) and the ball cage (L): H (max) = 2 (l - L);
- L1 - L6 in the table represents the cage length (L) / stroke length; list box;
- Type 1: D = 4 - 12; type 2: D = 16 - 40;
- for installation and maintenance instructions, please refer to the appendix.
Special requests:
Other dimensions, designs or materials are also available according to the drawing (stainless steel 44B (1.14112)).
Art. Nr. |
d |
l |
Material |
2D/3D |
Order unit |
Sample |
Delivery time |
Order |
Art. Nr. |
d |
l |
Material |
2D/3D |
Order unit |
Sample |
Delivery time |
Order |
|