clamping segment: stainless steel 440B (1.4112), hardened and ground.
Characteristics:
assembly: take-off clamping plate and screw; fasten body by means of threaded pin via WS2;
operation: manually or automatically with pneumatic or hydraulic control;
for clamping and centering of work pieces with internal bore;
exact self centering with a precision of ±0,025 mm;
due to the clamping segments being ground, work pieces with raw and/or machined surfaces can be frictionally connected, centered and held down at the seats;
large adjustment stroke and a low building height are a feature of the centering clamping element;
HE49.0006.1450 can be adjusted from above without SW1, with set screw and threaded end;
D3 is 2,0 at .1450; 2,5 at .1850; 3,0 at .2250 - .2650; 4,0 at .3050 - .4650; 5,0 at .5450 - .8650;
D4 is 6 at .1450; 8 at .1850; 10 at .2250 - .2650; 12 at .3050 - .4650; 14 at .5450; 16 at .7050 - .8650;
L1 is 12,0 at .1450; 14,0 at .1850; 15,0 at .2250 - .2650; 20,0 at .3050 - .4650; 32,0 at .5450; 20,0 at .7050; 25,0 at .8650;
L8 is 2,3 at .1450 - .2250; 4,6 at .3050 - .4650; 9,3 at .5450 - .8650;
l is 2,5 at .1450; 3,5 at .1850 - .3050; 4,5 at .3850; 6,5 at .4650 - .8650;
l1 is 5,5 at .1450; 7,5 at .1850; 6,0 at .2250 - .2650; 7,0 at .3050; 11,0 at .3850 - .4650; 9,0 at .5450; 10,0 at .7050 - .8650;
l2 is 4,5 at .1450; 5,5 at .1850; 7,0 at .2250 - .2650; 9,0 at .3050; 11,0 at .3850 - .4650; 15,0 at .5450; 17,0 at .7050; 25,0 at .8650;
X is 3,0 at .1450 - .3050; 6,0 at .3850 - .8650;
SW1 is 5,0 at .1850; 6,0 at .2250 - .3050; 8,0 at .3850 - .4650; 10,0 at .5450; 12,0 at .7050 - .8650;
L8 in the table represents the stroke (mm);
d1, d2, L and L9 in the table represent the bore;
bore d1 in the table has a tolerance of H7;
F1 (kN) in the table represents the maximum clamping force.
