Cylindrical Stop

Material:

• stop: steel, case-hardened, ground;
• holding plate: steel, blackened;
• screw: steel, quality 8.8 (ISO 4762).

Characteristics:

• the T-slot guide enables a quick and precise location of the work piece;
• the cylindrical form of the stop facilitates to determine the 0-point coordinate;
• the short form, which is ground to a height tolerance of ± 0,01 mm, can also be used for locating;
• L = 15 has a tolerance of ± 0.01;
• L = 25 has a tolerance of ± 0.20 for nominal slot sizes 10 and 12; for the rest, the tolerance is ± 0.01;
• L = 50 has a tolerance of ± 0.20;
• x in the table represents the nominal slot size (h6 tolerance) (mm);
• x1 in the table represents for which screw (ISO 4762) the stop is suitable (mm).
• x in the table represents for which system the centering pin is suitable.