The store will not work correctly in the case when cookies are disabled.
Guide shaft DIN 9825
Material:
- D = 2,5 - 6,0: X155 CrVMo 12 1 (1.2379);
- D = 8,0 - 40,0: 100 Cr 6 (1.3505); 16 MnCr 5 (1.7131); or similar ball bearing steel alloys;
- carefully heat-treated; hardness rating HRC 60-64/HV 720-815;
- depending on diameter minimum depth of case hardness 0.8 - 1.5 mm (up to diameter D = 10 throughhardened).
Characteristics:
- guide shaft DIN 9825;
- hardened guide shaft with precision ground surface;
- suitable for high-precision rotary stroke bearings;
- when used with MarMotion guide bushes and ball cages, preloading is ensured;
- * in the dimension drawing stands for the conductivity side;
- *1 in the dimension drawing stands for the press-in side;
- guide diameter D is precision ground and lapped to ISO h3, R less than 1 μm;
- D at 12 - 20 = M6 x 16;
- D at 25 - 40 = M8 x 20;
- roundness within 1/3 ISO-IT3;
- straightness within 5 μm/100 mm;
- ends are either rounded or have lead-in taper;
- for instructions about installation and maintenance, please refer to the appendix.
Special requests:
Other dimensions or designs based on workpiece drawings are available, also of stainless steel 440B (1.4112).
Art. Nr. |
d |
l |
Material |
2D/3D |
Order unit |
Sample |
Delivery time |
Order |
Art. Nr. |
d |
l |
Material |
2D/3D |
Order unit |
Sample |
Delivery time |
Order |
|