To be used for locating fixtures and clamping elements onto machine tables with T-slots to DIN 650. Being simply pushed into position after fixture or clamping element has been roughly positioned, they cannot cause damage to the machine as could protruding fixed slot tenons or low slot tenons.
Material:
steel, case-hardened, blackened, ground.
Characteristics:
type 1: form A, L1 > L3;
type 2: form B, L1 = L3;
type 3: form C, L1 < L3;
L1 in the table represents the nominal slot size of the fixture (h6 tolerance);
L3 in the table represents the machine's nominal slot size (h6 tolerance).
