Positioning Ring

Material:

• positioning ring: steel, blackened.

Characteristics:

• the positioning ring is an accessory to down-thrust clamps HE26 and
• HE66;
• after aligning the clamp positioning rings are fitted on the spindle with the effect that repeated clamping is always exactly on the same point;
• positioning ring is rotating by 360°;
• on down-thrust clamps. after mounting the clamp can swing 110° to the left or right;
• before mounting the positioning ring, pull-off top portion of down-thrust clamp;
• x1 in the table indicates for which down-thrust clamp the positioning ring is suitable.