Pull-Down Set

Characteristics:

• pull-down elements are suitable for clamping and pulling down clamping surfaces that are unmachined or pre-machined onto the guideway or onto the supplied clamping bolts;
• this way workpieces can be clamped almost exactly parallel to the guideway for machining;
• the direct contact to the clamping bolts largely reduces vibrations in the workpiece.
• type 1: pull-down set low; type 2: pull-down set high;
• x in the table indicates the jaw size (mm).

Components type 1

• 4 x wedge adapter, high (HN26.0006.0002);
• 4 x bolts, high M 10 x 33 mm (HN27.1019.0450);
• 4 x wedge element, 4 point (HN28.0006.1301);
• 4 x wedge element Microgripper (HN28.0006.1102);
• 4 x clamping bolts 48 mm (HN29.0006.0480);
• 4 x clamping bolts 34 mm (HN29.0006.0340).

Components type 2

• 4 x wedge adapter, low (HN26.0006.0001);
• 4 x bolts, low M 10 x 30 mm (HN27.1019.0300);
• 4 x wedge element, 4 point (HN28.0006.1301);
• 4 x wedge element Microgripper (HN28.0006.1102);
• 4 x clamping bolts 23 mm (HN29.0006.0230);
• 4 x clamping bolts 34 mm (HN29.0006.0340).