Shaft Clamp

Material:

• body: steel, blackened;
• clamping screw: steel, zinc-coated (DIN 912).

Characteristics:

• shaft clamps used to clamp round workpieces, e.g. shafts, axels, tubes or rods voth axially and radially;
• the thread d serves to hold the assembly tool (optional);
• M(Nm) in the table represents the maximum tightening torque;
• D1, D2 and L3 in the table represent the bore;
• D1 in the table represents the hub hole (H7 tolerance);
• D2 in the table represents the shaft diameter.

Assembly

• 1) expand the clamping jaws to the diameter of the shaft to be clamped;
• 2) insert shaft clamp into hole usign the assembly tool;
• 3) insert and position the shaft;
• 4) clamp using cylinder screws (observe tightening torque).