A robust lifting element for quick and easy use, featuring a movable shackle and a locking pin. To lift loads, the threaded lifting eye is inserted into a threaded hole.
A green indicator ring provides a clear visual check for correct installation. The operating surface with a recessed grip allows for safe and ergonomic pressing of the button while maintaining full visibility of the indicator ring. The redesigned shackle, featuring an enlarged opening, provides extra space for lifting gear and expands the range of applications. The design ensures that the threaded segments do not come into contact with the shackle's crossbar during use, thereby guaranteeing reliable operation.
The integrated RFID chip enables unique identification, for example for inspection, maintenance, or logistics processes.
Thanks to identical nominal dimensions, the Threaded lifting pin self-lock. rotatable(AP33) can, if necessary, be replaced by Threaded lifting pin self-lock. rotatable PLUS.
PLUS.
rapid deployment thanks to tool-free, screw-free installation;
visual installation check via a clearly visible green indicator ring;
threaded segments without contact with the yoke safety bar;
integrated RFID chip for identification and process support;
ergonomic operation thanks to the recessed side grip, enabling comfortable and safe operation of the push-button;
safety shackle with an enlarged opening to accommodate various lifting devices;
the stainless steel version is weather-resistant;
installation: press and hold the button, insert the threaded element into the thread, and release the button (the button must return to its original position). A clearly visible green mark on the button indicates the correct position. Tighten the lifting eye by hand until it rests fully against the surface of the component (mandatory). Ensure that the thread segments engage with the mounting thread;
removal: unscrew the lifting eye by approximately a quarter-turn counter-clockwise. Press and hold the button. Remove the lifting eye, release the button;
each threaded lifting pin includes an instruction manual with an EC Declaration of Conformity;
F(kN), F1(kN), and F2(kN) are based on a 5:1 safety factor against breakage;
F(kN), F1(kN), and F2(kN) in the table represent the load capacity (kN);
x in the table represents the internal thread (mm);
M in the table represents the tightening torque (Nm);
