clamp: steel, zinc-plated by galvanization, passivated;
rivet: stainless steel; steel;
handle: plastic;
clamping screw: steel, tempered, zinc-plated;
clamping cap:
Characteristics:
due to their favourable power to movement ratio and their easy action the toggle clamps are versatile applicable for a wide rang of uses;
the "toggle" principle of the toggle clamp allows a large and quick opening of the clamp;
if unclamped the work pieces are completely cleared for unimpeded removal;
the large power transmission results maximum clamping force by low hand force;
the clamps are self-arresting they remain locked, resisting the force produced when machining components;
the toggle clamps are manufactured from high quality components and are designed for continuous use;
an oil resistant ergonomic 2-component handle, with increased grip area with soft surface for high ease of use;
the quickly adjustable clamping screws are provided by a retainer;
temperature range from a minimum of -10°C to a maximum of 80°C;
d1 is 5,6 at HE68.0607.3503; 5,1 at HE68.0807.4504; 8,5 at HE68.0807.6505;
L12 is 4 at HE68.0407.2501; 5 at HE68.0507.3002; 6 at HE68.0607.3503; 8 at HE68.0807.4504; 10 at HE68.0807.6505 and HE68.0807.6506;
L13 is 6,3 at HE68.0407.2501; 5,5 at HE68.0507.3002; 6,0 at HE68.0607.3503; 7,0 with HE68.0807.4504; 8,0 at HE68.0807.6505; 12,5 with HE68.0807.6506;
L14 is 16,0 at HE68.0407.2501; 18,0 - 21,5 at HE68.0507.3002; 19,5 - 29,5 at HE68.0607.3503; 22,0 - 31,8 at HE68.0807.4504; 29,0 - 43,0 at HE68.0807.6505; 41,5 at HE68.0807.6506;
L15 is 11,5 - 15,5 at HE68.0407.2501; 13,0 - 14,5 at HE68.0507.3002; 26,0 at HE68.0607.3503; 25,7 at HE68.0807.4504; 41,0 at HE68.0807.6505; 41,5 at HE68.0807.6506;
H is 28,5 at HE68.0607.3503; 31,6 at HE68.0807.4504; 43,0 at HE68.0807.6505;
H1 is 12,7 at HE68.0607.3503; 13,0 at HE68.0807.4504; 20,5 at HE68.0807.6505;
x in the table represents the nominal size;
x1 in the table represents the dimensions of the clamping screw;
F1 (kN) and F2 (kN) in the table represent the holding force.
