due to their favourable power to movement ratio and their easy action the toggle clamps are versatile applicable for a wide rang of uses;
the "toggle" principle of the toggle clamp allows a large and quick opening of the clamp;
if unclamped the work pieces are completely cleared for unimpeded removal;
the large power transmission results maximum clamping force by low hand force;
the clamps are self-arresting they remain locked, resisting the force produced when machining components;
the toggle clamps are manufactured from high quality components and are designed for continuous use;
an oil resistant ergonomic 2-component handle, with increased grip area with soft surface for high ease of use;
the quickly adjustable clamping screws are provided by a retainer;
temperature range from a minimum of -10°C to a maximum of 80°C;
at r = 105° and 115°, the opening angle of the handle can be changed to 60° by inserting a stop pin;
L12 is 4 at HE67.0407.2501; 5 at HE67.0507.3002; 6 at HE67.0607.3503; 8 at HE67.0807.4504; 10 at HE67.0807.6505; 14 at HE67.1207.8006;
L13 is 5,5 at HE67.0407.2501 and HE67.0507.3002; 6.0 at HE67.0607.3503; 7,5 at HE67.0807.4504; 13,0 at HE67.0807.6505; 9,5 at HE67.1207.8006;
L14 is 23,0 at HE67.0407.2501; 22,5 - 26,0 at HE67.0507.3002; 23,0 - 31,0 at HE67.0607.3503; 32,5 at HE67.0807.4504; 43,5 - 46,5 at HE67.0807.6505; 45,0 - 50,0 at HE67.1207.8006;
L15 is 8,5 - 13,5 at HE67.0407.2501; 16,0 at HE67.0507.3002; 20,0 at HE67.0607.3503 and HE67.0807.4504; 32,0 at HE67.0807.6505; 45,0 at HE67.1207.8006;
H is 27 at HE67.0607.3503; 45 at HE67.1207.8006;
H1 is 12,5 at HE67.0607.3503; 26,5 - 31,5 at HE67.1207.8006;
x in the table represents the nominal size;
x1 in the table represents the dimensions of the clamping screw;
F1(kN) and F2(kN) in the table represent the holding force.
