Clamping Element model 1

Material:

• clamp: steel, case-hardened, blackened, ground.

Characteristics:

• the hole depth has to be adapted to the desired clamping height;
• to provide a counter force, a support can be placed against the rounded end of the clamp (radius 22);
• clamping is achieved by means of a DIN 933 hexagon screw;
• D in the table represents the bore (H7 tolerance);
• L in the table represents the length of the clampnose
• *: bore for pins f.e. HG25, HG26, and HG27 (20xM12);
• *1: pilar radius.