body: case hardened steel, nitrided, phosphate treated (manganese), ground;
Characteristics:
the support element is used to support additional clamping points on components;
provides additional support without distortion;
helps to eliminate tool vibration;
supports ribs, beads and shackles to reinforce clamped components;
distortion-free support of raw parts;
for safe functioning, the thread bore M 12 must always be closed;
additional flexible possibility of fitting with holder (HE16.0306.0350) or holding plate (HE09.1229.1200);
the M 8 threaded pin on the support bolt can be replaced by various locating and seating pins;
suitable for V70 / L12 / L16 systems;
customer-made extensions can also be fitted.
*: DIN 913 (interchangeable).
Assembly
fix the support element (2 x M 6 thread) onto the device;
alternative: dismantle the M 12 x 10 threaded pin and replace it by an M 12 x 30 threaded pin and assemble the support element with a wrench (WS 21), e.g. for;
threaded pin M 12 x 30 and T-nut DIN 508 M 12 x 14, quality 10, are part of the standard supply volume;
lowering of the support element by 16 mm is possible.
Operation:
By turning the clamping cam (WS 6 internal hexagon) on the outer surface of the red protective sleeve, the support pin contacts the workpiece with a slight spring load.
By turning on (15 Nm) as far as possible (lock), total of 180°, the clamping mechanism locks the support pin without moving. The support element has been placed onto the workpiece and locked.
If turned in the opposite direction (unlock), the clamping is released. If turned back as far as possible, i.e. total of 180° the support pin moves to the end position.
